BYFBK - AWSA5.9-77 308 CR-NI BARE WIRE & STRIP ELECTRODES & RODS
- MSDS: BYFBK
- Manufacturer: SANDVIK INC WELDING AND WIRING DIV
- Product Name: AWSA5.9-77 308 CR-NI BARE WIRE & STRIP ELECTRODES & RODS
- National Stock Number: 3439-01-015-8644
Product Identification
Product ID:AWSA5.9-77 308 CR-NI BARE WIRE & STRIP ELECTRODES & RODS
MSDS Date:04/01/1991
FSC:3439
NIIN:01-015-8644
MSDS Number: BYFBK
Responsible Party
SCRANTON, PA 18501
US
Emergency Phone: 717-587-5191
Info Phone: 717-586-8183
Cage: 61005
Contractor
Telephone: 717-587-5191
Cage: 61005
Ingredients
CHROMIUM (SARA 313) (CERCLA)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 1-30%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9495
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COPPER (SARA 313) (CERCLA)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: <4%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2 MG/M3 FUME; 9495
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
IRON
CAS: 7439-89-6
RTECS: NO4565500
Fraction By Weight: BALANCE
MANGANESE (SARA 313)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 1-5%
OSHA PEL C 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9495
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 1-5%
OSHA PEL 10 PPM.
ACGIH TLV: 10 PPM.
NICKEL (SARA 313) (CERCLA)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 1-35%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9495
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0.4-2.0%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9495
Hazards
LD50 LC50 Mixture:TLV (WELDING FUME, NOC)= 5 MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES AND GASES CAN BE
DANGEROUS TO HEALTH. INHALATION OF WELDING FUMES/GASES MAY CAUSE
RESPIRATORY DISCOMFORT. WELDING ARC CAN INJURE EYES & BURN SKIN.
ELECTRIC SHOCK CAN KILL. CHRONIC: PROLON GED OR REPEATED EXPOSURE
MAY CAUSE SIDEROSIS, CNS DAMAGE, SENSITIZATION DERMATITIS, AND MAY
AFFECT PULMONARY FUNCTION.
Explanation of Carcinogenicity:CHROMIUM & NICKEL ARE LISTED BY NTP &
IARC AS A SUSPECTED CARCINOGEN.
Effects of Overexposure:DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF
NOSE, THROAT, EYES.
Medical Cond Aggravated by Exposure:AGGRAVATION OF RESPIRATORY OR
ALLERGIC CONDITIONS.
First Aid
First Aid:REMOVE FROM EXPOSURE AND CALL FOR MEDICAL AID. EMPLOY FIRST
AID TECHNIQUE RECOMMENDED BY THE AMERICAN RED CROSS.
Fire Fighting
Flash Point:NONFLAMMABLE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: WATER
FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: WEAR
SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:PER MANUFACTURER-NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. AVOID
BREATHING FUMES/GASES.
Other Precautions:TRAIN EACH WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS
AND TO INSULATE HIS/HER PERSON FROM WORK AND GROUND.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR-SUPPLIED
RESPIRATOR WHE WELDING IN CONFINES SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV/PEL.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION OR LOCAL EXHAUST TO
MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WORK GLOVES.
Eye Protection:WELDERS LENSES/HELMET.
Other Protective Equipment:WEAR HEAD, HAND, BODY PROTECTION TO HELP
PREVENT INJURY FROM RADIATION, SPRAKS, ELECTRICAL SHOCK PER ANSI
Z49.1.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Appearance and Odor:CHROMIUM-NICKEL COATED ROD CONSISTING OF SOLID WIRE
OR STRIP.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE SIMPLY
CLASSIFIED.THE COMPOSITION & QUANTITY DEPEND ON THE METAL BEING
WELDED & PROCESS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.